3Com WXR100 3CRWXR10095A - Manual (Page 365)

display ap config 365
Table 54 Output for display ap config
Field Description
Port WX port number to which the MAP is connected, if
specified for the MAP.
AP Index number that identifies the MAP to the WX.
Serial-Id Serial ID of the MAP access point.
AP model MAP access point model number.
bias Bias of the WX connection to the MAP:
„ High
„
Low
name MAP access point name, if configured.
upgrade-firmware State of the firmware upgrade option:
„ YES (automatic upgrades are enabled)
„
NO (automatic upgrades are disabled)
force-image-download State of the option to force the MAP to download its
software image from the WX switch instead of loading the
image that is locally stored on the MAP.
communication
timeout
location Location information for the MAP.
contact Contact information for the MAP.
Radio Radio number. The information listed below this field
applies specifically to the radio.
type Radio type:
„
802.11a
„
802.11b
„ 802.11g
mode Radio state:
„
Enabled
„ Disabled
channel Channel number.
antennatype External antenna model, if applicable.
tx pwr Transmit power, in dBm.