3Com WXR100 3CRWXR10095A - Manual (Page 301)

set authentication proxy 301
See Also
„
clear user lockout on page 274
„
set authentication minimum-password-length on page 299
„
set authentication max-attempts on page 298
set authentication
proxy Configures a proxy authentication rule for a third-party AP’s wireless
users.
Syntax — set authentication proxy ssid ssid-name user-glob
radius-server-group
„ ssid ssid-name — SSID name to which this authentication rule
applies.
„ user-glob — A single user or a set of users. Specify a username, use
the double-asterisk wildcard character (**) to specify all usernames, or
use the single-asterisk wildcard character (*) to specify a set of
usernames up to or following the first delimiter character—either an
at sign (@) or a period (.). (For details, see “User Globs, MAC Address
Globs, and VLAN Globs” on page 78.)
„ radius-server-group — A group of RADIUS servers used for
authentication.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.0.
Usage — AAA for third-party AP users has additional configuration
requirements. See the “Configuring AAA for Users of Third-Party APs”
section in the “Configuring AAA for Network Users” chapter of the
Wireless LAN Switch and Controller Configuration Guide .
Examples — The following command configures a proxy authentication
rule that matches on all usernames associated with SSID mycorp. MSS
uses RADIUS server group srvrgrp1 to proxy RADIUS requests and hence
to authenticate and authorize the users.
WX4400# set authentication proxy ssid mycorp ** srvrgrp1