3Com WXR100 3CRWXR10095A - Manual (Page 444)

444 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
Examples — The following command configures a WX to require
Distributed MAPs to have encryption keys:
WX4400# set ap security require
See Also
„
display ap config on page 364
„
display ap status on page 379
„
set ap fingerprint on page 424
set ap
upgrade-firmware Disables or reenables automatic upgrade of a MAP access point boot
firmware.
Syntax —
set ap auto upgrade-firmware {enable | disable}
„ ap auto — Configures firmware upgrades for the MAP configuration
profile (See “set ap auto” on page 410.)
„ enable — Enables automatic firmware upgrades.
„ disable — Disables automatic firmware upgrades.
Defaults — Automatic firmware upgrades of MAP access points are
enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — When the feature is enabled on an WX port, a MAP access
point connected to that port upgrades its boot firmware to the latest
version stored on the WX switch.
Examples — The following command disables automatic firmware
upgrades on the MAP access point connected to port 6:
WX1200# set ap 6 upgrade-firmware disable
See Also
„
display ap config on page 364