3Com WXR100 3CRWXR10095A - Manual (Page 715)

copy 715
WX4400# reset system force
...... rebooting ......
See Also
„
display config on page 723
„
reset system on page 731
copy Performs the following copy operations:
„
Copies a file from a TFTP server to nonvolatile storage.
„
Copies a file from nonvolatile storage or temporary storage to a TFTP
server.
„
Copies a file from one area in nonvolatile storage to another.
„
Copies a file to a new filename in nonvolatile storage.
Syntax — copy source-url destination-url
„ source-url
— Name and location of the file to copy. The uniform
resource locator (URL) can be one of the following:
„ [subdirname/]filename
„ file: [subdirname/]filename
„ tftp://ip-addr /[subdirname/]filename
„ tmp: filename
For the filename, specify between 1 and 128 alphanumeric characters,
with no spaces. Enter the IP address in dotted decimal notation.
The subdirname/ option specifies a subdirectory.
„ destination-url — Name of the copy and the location where to
place the copy. The URL can be one of the following:
„ [subdirname/]filename
„ file: [subdirname/]filename
„ tftp:// ip-addr/[subdirname/]filename
If you are copying a system image file into nonvolatile storage, the
filename must include the boot partition name. You can specify one of
the following:
„ boot0: /filename
„ boot1: /filename