3Com WXR100 3CRWXR10095A - Manual (Page 625)

16 RADIUS
AND
S
ERVER
G
ROUP
C
OMMANDS
Use RADIUS commands to set up communication between a WX switch
and groups of up to four RADIUS servers for remote authentication,
authorization, and accounting (AAA) of administrators and network
users.
Commands by
Usage This chapter presents RADIUS commands alphabetically. Use Table 92 to
locate commands in this chapter based on their uses.
(For information about RADIUS attributes, see the RADIUS appendix in
the
Wireless LAN Switch and Controller Configuration Guide .)
Table 92 RADIUS Commands by Usage
Type Command
RADIUS Client set radius client system-ip on page 632
clear radius client system-ip on page 627
RADIUS Servers set radius on page 630
set radius server on page 635
clear radius on page 626
clear radius server on page 629
Server Groups set server group on page 637
set server group load-balance on
page 638
clear server group on page 629
RADIUS Proxy set radius proxy client on page 633
set radius proxy port on page 634
clear radius proxy client on page 628
clear radius proxy port on page 628