Set service-profile load-balancing- exempt – 3Com WXR100 3CRWXR10095A User Manual
Page 496
496
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
set service-profile
load-balancing-
exempt
Exempts a service profile from performing RF load balancing.
Syntax —
set service-profile
name load-balancing-exempt
{enable
| disable}
name
— Service profile name.
enable
— Exempts the specified service profile from RF load
balancing.
disable
— If a service profile has previously been exempted from RF
load balancing, restores RF load balancing for the service profile.
Defaults
—
By default, MAP radios automatically perform RF load
balancing for all
service profiles.
Access
—
Enabled.
History
—
Introduced in MSS Version 6.0.
Usage
—
Use this command to exempt a service profile from RF load
balancing.
Exempting a service profile from RF load balancing means that
even if an MAP radio is attempting to steer clients away, it does not
reduce or conceal the availability of the SSID named in the exempted
service profile. Even if a radio is withholding probe responses to manage
its load, the radio does respond to probes for an exempt SSID. Also, if an
MAP radio is withholding probe responses, and a client probes for any
SSID, and the radio has at least one exempt SSID, the radio responds to
the probe, but the response reveals only the exempt SSID(s).
Examples
—
The following command exempts service profile sp3 from
RF load
balancing:
WX# set service-profile sp3 load-balancing-exempt enable
success: change accepted.
See Also
display load-balancing group on page 396
set load-balancing strictness on page 447
set ap radio load balancing on page 437