3Com WXR100 3CRWXR10095A - Manual (Page 725)

display version 725
Usage — If you do not use one of the optional parameters, configuration
commands that set nondefault values are displayed for all configuration
areas. If you specify an area, commands are displayed for that area only. If
you use the all option, the display also includes commands for
configuration items that are set to their default values.
Examples — The following command shows configuration information
for VLANs:
WX4400# display config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also
„
load config on page 727
„
save config on page 733
display version Displays software and hardware version information for an WX switch
and, optionally, for any attached MAP access points.
Syntax — display version [details]
„ details — Includes additional software build information and
information about the MAP access points configured on the WX
switch.
Defaults — None
Access — All.
History —Introduced in MSS Version 3.0.