Set server group – 3Com WXR100 3CRWXR10095A User Manual

Page 637

Advertising
background image

set server group

637

Examples — To set a RADIUS server named RS42 with IP address
198.162.1.1 to use the default accounting and authorization ports with a
timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead
time, and a key string of keys4u, type the following command:

WX1200# set radius server RS42 address 198.162.1.1 timeout 30

retransmit 2 deadtime 5 key keys4U

See Also

„

display aaa on page 277

„

set authentication admin on page 287

„

set authentication console on page 289

„

set authentication dot1x on page 291

„

set authentication mac on page 295

„

set authentication mac on page 295

„

set authentication web on page 302

„

set radius on page 630

„

set server group on page 637

set server group

Configures a group of one to four RADIUS servers.

Syntax

set server group group-name members server-name1

[server-name2] [server-name3] [server-name4]

„

group-name

Server group name of up to 32 characters, with no

spaces or tabs.

„

members

server-name1, server-name2, server-name3,

server-name4

— The names of one or more configured RADIUS

servers. You can enter up to four server names.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must assign all group members simultaneously, as shown
in the example. To enable load balancing, use set server group
load-balance enable
.

Advertising
This manual is related to the following products: