3Com WXR100 3CRWXR10095A - Manual (Page 573)

set igmp 573
See Also
„
clear igmp statistics on page 562
set igmp Disables or reenables IGMP snooping on one VLAN or all VLANs on a
wireless LAN switch.
Syntax — set igmp {enable | disable} [vlan vlan-id]
„ enable
— Enables IGMP snooping.
„ disable — Disables IGMP snooping.
„ vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, IGMP snooping is disabled or reenabled on all VLANs.
History — Introduced in MSS Version 3.0.
Examples — The following command disables IGMP snooping on VLAN
orange:
WX1200# set igmp disable vlan orange
success: change accepted
See Also
„
set igmp rv on page 582
Topology
notifications Number of Layer 2 topology change notifications received by the
WX.
In the current software version, the value in this field is always 0.
Packets with
unknown
IGMP type Number of multicast packets received with an unrecognized
multicast type.
Packets with
bad length Number of packets with an invalid length.
Packets with
bad IGMP
checksum Number of packets with an invalid IGMP checksum value.
Packets
dropped Number of multicast packets dropped by the WX.
Table 86 Output of display igmp statistics (continued)
Field Description