Clear ap local-switching vlan-profile – 3Com WXR100 3CRWXR10095A User Manual
Page 355
clear ap local-switching vlan-profile
355
clear ap
local-switching
vlan-profile
Clears the VLAN profile that had been applied to an MAP to use with
local switching.
Syntax —
clear {ap ap-number local-switching vlan-profile
ap-number
— Index value that identifies the MAP on the WX switch.
Defaults — None.
Access
—
Enabled.
History
—
Introduced in MSS Version 6.0.
History
—
A VLAN profile consists of a list of VLANs and tags. When a
VLAN
profile is applied to a MAP, traffic for the VLANs specified in the
VLAN profile is locally switched by the MAP instead of being tunneled
back to a WX. When the VLAN profile is cleared from the MAP, traffic
that had been locally switched is tunneled to a WX.
When clearing a VLAN profile causes traffic that had been locally
switched by MAPs to be tunneled to a WX, the sessions of clients
associated with the MAPs where the VLAN profile is applied are
terminated, and the clients must re-associate with the MAPs.
Examples
—
The following command clears the VLAN profile that had
been
applied to MAP 7:
WX# clear ap 7 local-switching vlan-profile
success: change accepted.
See Also
set ap local-switching mode on page 427