3Com WXR100 3CRWXR10095A - Manual (Page 183)

7 IP S
ERVICES
C
OMMANDS
Use IP services commands to configure and manage IP interfaces,
management services, the Domain Name Service (DNS), Network Time
Protocol (NTP), aliases, and to ping a host or trace a route.
Commands by
Usage This chapter presents IP services commands alphabetically. Use Table 29
to locate the commands in this chapter based on their use.
Table 29 IP Services Commands by Usage
Type Command
IP Interface set interface on page 218
set interface dhcp-client on page 219
set interface status on page 221
display interface on page 200
display dhcp-client on page 196
clear interface on page 185
System IP Address set system ip-address on page 251
clear system ip-address on page 194
IP Route set ip route on page 226
display ip route on page 204
clear ip route on page 188
SSH Management set ip ssh server on page 229
set ip ssh on page 228
Telnet Management set ip telnet on page 229
set ip telnet server on page 230
display ip telnet on page 206
clear ip telnet on page 189