3Com WXR100 3CRWXR10095A - Manual (Page 207)

display ntp 207
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 39 describes the fields in this display.
See Also
„
clear ip telnet on page 189
„
display ip https on page 203
„
set ip https server on page 225
„
set ip telnet on page 229
„
set ip telnet server on page 230
display ntp Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table 39 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
„ Enabled
„
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.