Network domain commands, Network domain commands by usage, Etwork – 3Com WXR100 3CRWXR10095A User Manual
Page 339: Omain, Ommands
10
N
ETWORK
D
OMAIN
C
OMMANDS
Use Network Domain commands to configure and manage Network
Domain groups.
A Network Domain is a group of geographically dispersed Mobility Domains
that share information over a WAN link. This shared information allows a user
configured on a WX in one Mobility Domain to establish connectivity on a WX
in another Mobility Domain in the same Network Domain. The WX forwards
the user traffic by creating a VLAN tunnel to a WX in the remote Mobility
Domain.
In a Network Domain, one or more WX switches serve as a seed switch.
At least one of the Network Domain seeds maintains a connection with
each of the member WX switches in the Network Domain. The Network
Domain seeds share information about the VLANs configured on their
members, so that all the Network Domain seeds have a common
database of VLAN information.
Network Domain
Commands by
Usage
This chapter presents Network Domain commands alphabetically. Use
Table 49 to locate commands in this chapter based on their use.
Table 49 Network Domain Commands by Usage
Type
Command
Network Domain
set network-domain mode seed domain-name on
page 348
set network-domain mode member seed-ip on
page 346
set network-domain peer on page 347