3Com WXR100 3CRWXR10095A - Manual (Page 388)

388 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
display auto-tune
neighbors Displays the other 3Com radios and third-party 802.11 radios that a
3Com radio can hear.
Syntax — display auto-tune neighbors
[ap map-num [radio {1 | 2| all}]]
Syntax — display auto-tune neighbors
[ap ap-number [radio {1 | 2| all}]]
„ ap-number — Index value that identifies the MAP on the WX.
„ radio 1 — Shows neighbor information for radio 1.
„ radio 2
— Shows neighbor information for radio 2. (This option does
not apply to single-radio models.)
„ radio all — Shows neighbor information for both radios.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Version 6.0 removed the dap
option.
Usage — For simplicity, this command displays a single entry for each
3Com radio, even if the radio is supporting multiple BSSIDs. However,
BSSIDs for third-party 802.11 radios are listed separately, even if a radio is
supporting more than one BSSID.
Information is displayed for a radio if the radio sends beacon frames or
responds to probe requests. Even if a radio SSIDs are unadvertised, 3Com
radios detect the empty beacon frames (beacon frames without SSIDs)
sent by the radio, and include the radio in the neighbor list.