3Com WXR100 3CRWXR10095A - Manual (Page 642)

642 C HAPTER 17: 802.1X M ANAGEMENT C OMMANDS
clear dot1x
bonded-period Resets the Bonded Auth™ (bonded authentication) period to its default
value. The bonded period is the number of seconds MSS retains session
information for an authenticated machine while waiting for an 802.1X
client on the machine to start (re)authentication for the user. When
bonded authentication is enabled, it applies only to an 802.1X user
whose authentication rule on the WX switch contains the bonded
option.
Syntax —
clear dot1x bonded-period
Defaults — The default bonded authentication period is 0 seconds,
which disables the feature.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the Bonded period to its default, type the following
command:
WX4400# clear dot1x bonded-period
success: change accepted.
set dot1x reauth-period on page 657
clear dot1x reauth-period on page 645
Retransmission set dot1x max-req on page 653
clear dot1x max-req on page 643
Quiet Period and Timeouts set dot1x quiet-period on page 655
clear dot1x quiet-period on page 644
set dot1x timeout auth-server on page 657
clear dot1x timeout auth-server on
page 646
set dot1x timeout supplicant on page 658
clear dot1x timeout supplicant on page 646
Settings, Active Clients, and
Statistics display dot1x on page 647
Table 93 802.1X Commands by Usage (continued)
Type Command