3Com WXR100 3CRWXR10095A - Manual (Page 489)

set service-profile cipher-tkip 489
set service-profile
cipher-tkip Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in
a service profile.
Syntax — set service-profile
name cipher-tkip {enable | disable}
„ name
— Service profile name.
„ enable — Enables TKIP encryption for WPA clients.
„ disable — Disables TKIP encryption for WPA clients.
Defaults — When the WPA IE is enabled, TKIP encryption is enabled by
default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use TKIP, you must also enable the WPA IE.
Examples — The following command disables TKIP encryption in service
profile sp2:
WX4400# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
„
display service-profile on page 401
„
set service-profile cipher-ccmp on page 488
„
set service-profile cipher-wep104 on page 490
„
set service-profile cipher-wep40 on page 491
„
set service-profile tkip-mc-time on page 514
„
set service-profile wpa-ie on page 529