IAI America XSEL-KET User Manual

Page 15

Advertising
background image

Pre-5

INTELLIGENT ACTUATOR

No.

Operation

Description

Description

8

Maintenance

and Inspection

● When the work is carried out with 2 or more persons, make it clear who is

to be the leader and who to be the follower(s) and communicate well with

each other to ensure the safety of the workers.

● Perform the work out of the safety protection fence, if possible. In the case

that the operation is to be performed unavoidably inside the safety

protection fence, prepare the “Stipulations for the Operation” and make

sure that all the workers acknowledge and understand them well.

● When the work is to be performed inside the safety protection fence,

basically turn OFF the power switch.

● When the operation is to be performed inside the safety protection fence,

the worker should have an emergency stop switch at hand with him so that

the unit can be stopped any time in an emergency.

● When the operation is to be performed inside the safety protection fence,

in addition to the workers, arrange a watchman so that the machine can be

stopped any time in an emergency. Also, keep watch on the operation so

that any third person can not operate the switches carelessly.

● Place a sign “Under Operation” at the position easy to see.

● For the grease for the guide or ball screw, use appropriate grease

according to the Operation Manual for each model.

● Do not perform the dielectric strength test. Failure to do so may result in a

damage to the product.

● When releasing the brake on a vertically oriented actuator, exercise

precaution not to pinch your hand or damage the work parts with the

actuator dropped by gravity.

* Safety protection Fence : In the case that there is no safety protection

fence, the movable range should be indicated.

9

Modification

and Dismantle

● Do not modify, disassemble, assemble or use of maintenance parts not

specified based at your own discretion.

10 Disposal

● When the product becomes no longer usable or necessary, dispose of it

properly as an industrial waste.

● Do not put the product in a fire when disposing of it.

The product may burst or generate toxic gases.

Advertising
This manual is related to the following products: