IAI America XSEL-KET User Manual
Page 383
364
INTELLIGENT ACTUATOR
Appendix
Other Parameters
No. Parameter
name
Default value
(Reference)
Input range
Unit
Remarks
37 PC/TP data protect
setting (Position)
0H 0H
~
FFFFFFFFH
Bits 0 to 3:
Protect type (0: Read/write, 1: Read
only, 2: No read/write)
Bits 4 to 7:
Protect release method (0: Special
operation)
Bits 8 to 11: Protect range maximum number (10’s
place, BCD)
Bits 12 to 15: Protect range maximum number (100’s
place, BCD)
Bits 16 to 19: Protect range maximum number
(1000’s place, BCD)
Bits 20 to 23: Protect range minimum number (10’s
place, BCD)
Bits 24 to 27: Protect range minimum number (100’s
place, BCD)
Bits 28 to 31: Protect range minimum number
(1000’s place, BCD)
* The value in the 1’s place is considered “0” for
both the protect range maximum/minimum
numbers.
* Referenced by the PC/TP (PC software version
2.0.0.42 or later and TP application version 1.09 or
later)
38 PC/TP data protect
setting (Symbol,
parameter)
0H 0H
~
FFFFFFFFH
Bits 0 to 3:
Protect type (Parameter) (0:
Read/write, 1: Read only, 2: No
read/write)
Bits 4 to 7:
Protect release method (Parameter) (0:
Special operation)
Bits 8 to 11: Protect type (Symbol) (0: Read/write, 1:
Read only, 2: No read/write)
Bits 12 to 15: Protect release method (Symbol) (0:
Special operation)
* Referenced by the PC/TP (PC software version
2.0.0.42 or later and TP application version 1.09 or
later)
39 (For
future
extension)
0H 0H
~
FFFFFFFFH
40 EEPROM
information check
type
3H Reference
only
For adjustment by the manufacture
41 Hardware
information check
type
E0H Reference
only
For adjustment by the manufacture
42 Hardware test type
7H
Reference
only
For adjustment by the manufacture
43 Special
monitor
type
0H 0H
~
FFFFFFFFH
Change
prohibited
44 (For
extension)
0