IAI America XSEL-KET User Manual
Page 427
Appendi
x
INTELLI
GENT A
CTUAT
OR
408
(In the panel window, the three digits after “E” indicate an error number.)
Error No.
Error name
Description, action, etc.
EAC
Servo control underrun error
A servo control underrun error was detected.
EAD
Boot error
A FPGA boot watchdog was detected. The core program may not be
running properly.
EAE
Application-update SCIF receive-queue overflow error
Excessive data is received from outside. (Confirm that a PC and IAI’s
update tool are used to update the application.)
EAF
Installed flash ROM type mismatch (Core)
The flash ROM type anticipated in the software does not match the flash
ROM type actually installed. Check the combination of software and
hardware.
EB2
Flash busy reset timeout (Core detection)
Flash ROM operation error. The flash ROM busy status cannot be reset.