H3C Technologies H3C SecPath F1000-E - Manual (Page 217)

24
Figure 12 Configure an MST region on Device A
• Configure the region name as example.
• Set the revision level to 0.
• Select the Manual radio button.
• Select 1 in the Instance ID drop-down list.
• Set the VLAN ID to 10.
• Click Apply.
• Repeat the steps above to map VLAN 30 to MSTI 3 and VLAN 40 to MSTI 4.
• Click Activate.
# Enable MSTP globally and configure the current device as the root bridge of MSTI 1.
• Select Network > MSTP > Global from the navigation tree, and make the following
configurations on the page shown in Figure 13 .