H3C Technologies H3C SecPath F1000-E - Manual (Page 826)

18
• Select CHAP as the PPP authentication method.
• Select ISP domain system (the default ISP domain).
• Click the Modify button of the ISP domain to perform the configurations shown inFigure 16.
Figure 16 Configure local authentication method for VPN users
• Select the server type Local as the PPP authentication method.
• Click Apply to return to the L2TP group configuration page.
• Type 192.168.0.1/255.255.255.0 as the PPP server IP address/mask.
• Select Trust from the PPP Server Zone drop-down list. (Select a security zone according to your
network configuration.)
• Click the Add button of the User Address parameter and then perform the configurations shown
in Figure 17 .
Figure 17 Add an IP address pool
• Select domain system.