H3C Technologies H3C SecPath F1000-E - Manual (Page 732)

20
• Select VPN > IKE > Peer from the navigation tree and then click Add. Make the configuration as
shown in Figure 27 .
Figure 27 Configure an IKE peer
• Type peer as the peer name.
• Select Main as the negotiation mode.
• Type 2.2.3.1 as the IP address of the remote gateway.
• Select Pre-Shared Key and type abcde as the pre-shared key.
• Click Apply.
# Configure an IPsec policy.
• Select VPN > IPSec > Policy from the navigation tree and then click Add. Make the
configuration as shown in Figure 28 .