H3C Technologies H3C SecPath F1000-E - Manual (Page 639)

4
Figure 4 Define ACL 2010
• Type 2010 in ACL Number.
• Click Apply.
• On the ACL list page, click corresponding to ACL 2010, click Add, and then perform the
following operations, as shown in
Figure 5 .
Figure 5 Configure ACL 2010
• Select Permit in Operation.
• Select Source IP Address and type 10.1.1.0 in the text box.
• Type 0.0.0.255 in Source Wildcard.
• Click Apply.
# Enable strict URPF check in zoneB.
• Select Intrusion Detection > URPF Check from the navigation tree and perform the following
operations, as shown in Figure 6 .