H3C Technologies H3C SecPath F1000-E User Manual
Page 769
23
Figure 41 Add a P2MP GRE tunnel interface
•
Type 0 in the Tunnel Interface text box.
•
Type IP address/mask 192.168.22.1/24.
•
Select Management from the Zone drop-down list. (Select a security zone according to your
network configuration.)
•
Type 11.1.1.1 as the tunnel source interface.
•
Type 24 as the branch network address mask.
•
Type 10 as the tunnel entry aging time.
•
Click Apply.
# Configure a static route from Device A through interface Tunnel 0 to the branch network.
•
Select Network > Routing Management > Static Routing from the navigation tree and
then click Add to perform the configurations shown in
.
Figure 42 Add a static route from Device A through interface Tunnel 0 to the branch network
•
Type 192.168.1.0 as the destination IP address.
•
Select mask 255.255.255.0.