H3C Technologies H3C SecPath F1000-E - Manual (Page 666)

8
Figure 11 Configure classification rules
• Select the radio button in front of Protocol Group and input 1 as the group ID.
• Click Apply.
# Create a traffic behavior and configure the behavior action.
• Select Firewall > QoS > Behavior from the navigation tree and click Add. Perform
configuration as shown in Figure 12 .
Figure 12 Create a traffic behavior
• Type behavior1 as the behavior name and then click Apply.
• Click corresponding to behavior1 in the list, and perform configuration as shown in Figure
13 .