N in, Figure 20 – H3C Technologies H3C SecPath F1000-E User Manual
Page 530
22
Figure 20 Configure rules for ACL 2000
•
Select Permit from the Operation drop-down list.
•
Select the Source IP Address option, type 1.1.1.1 as the source IP address, and 0.0.0.0 as the
source wildcard.
•
Click Apply.
# Configure ACL 2001 to match traffic from Host.
•
Select Firewall > ACL from the navigation tree, and click Add. Perform configuration on the page
shown in
.
•
Type 2001 as the ACL number.
•
Click Apply.
•
Click the icon corresponding to ACL 2001 on the ACL list, and click Add. Perform configuration
on the page shown in
.
•
Select Permit from the Operation drop-down list.
•
Select the Source IP Address option, type 1.1.1.2 as the source IP address, and 0.0.0.0 as the
source wildcard.
•
Click Apply.
Step2
Configure classes
# Create a class named classifier_server, and reference ACL 2000 in the class.
•
Select Firewall > QoS > Classifier from the navigation tree, and click Add. Perform
configuration on the page shown in
.
Figure 21 Create a class named classifier_server
•
Type classifier_server as the classfier name.
•
Click Apply.