H3C Technologies H3C SecPath F1000-E - Manual (Page 760)

14
Figure 28 Add a GRE over IPv4 tunnel interface (Tunnel 1)
• Type 1 in the Tunnel Interface text box.
• Type IP address/mask 192.168.22.1/24.
• Select Management from the Zone drop-down list. (Select a security zone according to your
network configuration.)
• Type the tunnel source IP address 10.1.1.1.
• Type the tunnel destination IP address 10.1.1.2.
• Click Apply.
# Create a P2MP GRE tunnel interface, with the tunnel interface number being 0.
• Select VPN > GRE > P2MP from the navigation tree and then click Add to perform the
configurations shown in
Figure 29 .