H3C Technologies H3C SecPath F1000-E User Manual
Page 536
28
•
Type the ACL number 3000.
•
Click Apply.
•
Click the icon corresponding to ACL 3000 in the ACL list and click Add. Perform configuration
on the page as shown in
.
Figure 31 Configure rules for ACL 3000
•
Select Permit in the Operation drop-down list.
•
Select the Destination IP Address option, and type IP address 192.168.0.1 and destination
wildcard 0.0.0.0.
•
Click Apply.
# Configure ACL 3001 to match packets with destination address 192.168.0.2.
•
Select Firewall > ACL from the navigation tree and then click Add. Perform configuration on the
page shown in
.
•
Type the ACL number 3001.
•
Click Apply.
•
Click the icon corresponding to ACL 3001 in the ACL list and click Add. Perform configuration
on the page shown in
.
•
Select Permit in the Operation drop-down list.
•
Select the Destination IP Address check box, and type IP address 192.168.0.2 and destination
wildcard 0.0.0.0.
•
Click Apply.
# Configure ACL 3002 to match packets with destination address 192.168.0.3.