H3C Technologies H3C SecPath F1000-E User Manual
Page 366
10
•
Click Apply.
# On Device B, enable IP multicast routing, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 0/1.
•
After logging in to the Web interface of Device B, select Network > Routing Management
> Multicast Routing from the navigation tree to enter the Global Configuration page.
•
Select Enable from the drop-down list to enable multicast routing.
•
Click Apply.
•
Select Network > Routing Management > PIM from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
•
Specify the working mode PIM-DM and click Apply.
•
Click the icon corresponding to GigabitEthernet 0/0 to enter its configuration page.
•
Specify the working mode PIM-DM and click Apply.
•
Select Network > Routing Management > IGMP from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
•
Select Enable from the drop-down list to enable IGMP.
•
Specify the IGMP version as 2.
•
Click Apply.
# On Device C, enable IP multicast routing, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 0/1.
•
After logging in to the Web interface of Device C, select Network > Routing Management
> Multicast Routing from the navigation tree to enter the Global Configuration page.
•
Enable multicast routing by selecting Enable from the drop-down list.
•
Click Apply.
•
Select Network > Routing Management > PIM from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
•
Specify the working mode PIM-DM and click Apply.
•
Click the icon corresponding to GigabitEthernet 0/0 to enter its configuration page.
•
Specify the working mode PIM-DM and click Apply.
•
Select Network > Routing Management > IGMP from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
•
Select Enable from the drop-down list to enable IGMP.
•
Specify the IGMP version as 2.
•
Click Apply.
Step3
Verify the configuration
Use the display igmp interface command to view the IGMP configuration and operation status on
each interface. For example: