H3C Technologies H3C SecPath F1000-E - Manual (Page 500)

6
Figure 7 Modify VLAN configuration
• Set GigabitEthernet 0/1 as an untagged member of VLAN 10.
• Click Apply.
# Configure a security zone for interface GigabitEthernet 0/1 and VLAN 10. (Omitted)
# Create VLAN-interface 10, and assign an IP address to it.
• Select Device Management > Interface from the navigation tree, and click Add to perform
configurations shown in Figure 8 .
Figure 8 Create an interface
• Set interface name to Vlan-interface 10.
• Select Static Address for IP Config
• Type 192.168.1.2 for IP Address.
• Type 24(255.255.255.0) for Mask.
• Click Apply.