H3C Technologies H3C SecPath F1000-E - Manual (Page 852)

3
• Synchronization: Indicates that the device has completed state negotiation with the other device
and is ready for data backup.
The following figure shows state relations.
Figure 3 Stateful failover state diagram
Configuring Stateful Failover
Select High Reliability > Stateful Failover from the navigation tree to enter the stateful failover
configuration page, as shown in Figure 4 .
Figure 4 Stateful failover configuration page
• You can configure stateful failover parameters at the upper part of the page. Table 1 describes the
stateful failover configuration items.
• The lower part of the page displays the current stateful failover configuration and the failover
interface information.