Driver installation, 1 creating the driver diskettes – Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache User Manual
Page 107
DRIVER INSTALLATION
107
4. Driver Installation
This chapter describes how to install the SAS RAID controller driver to
your operating system. The installation procedures use the following
terminology:
Installing operating system on SAS controller’s volume
If you have a new drive configuration without an operating system
and want to install operating system on a disk drive managed by the
SAS RAID controller. The driver installation is a part of the operating
system installation.
Installing SAS RAID controller into an existing operating sys-
tem
The computer has an existing operating system installed and the SAS
RAID controller is being installed as a secondary controller.
Have all required system hardware and software components on
hand before proceeding with the setup and installation.
Materials required:
• Microsoft Windows, Linux, FreeBSD, Solaris and Mac OS X installa-
tion CD
• SAS RAID controller software CD
• SAS RAID controller
4.1 Creating the Driver Diskettes
The software CD disc shipped with the ARC-1883 series 12Gb/s
RAID controller is a self-booting CD. In order to created driver
diskettes for Windows, Linux, FreeBSD, Solaris and Mac installation
drivers, your system is required to support booting from the CD-
ROM.
If you do not have the software CD disc with the package, contact
your local dealers or you can also download the latest version
drivers for Windows 10/8/Server 2012/7/2008/Vista/2003/XP,
Linux, FreeBSD, Solaris and Mac OS X from the Areca web site at
http://www.areca.com.tw