Appendix – Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache User Manual
Page 228
APPENDIX
228
7. After a successful installation, the “Setup Complete” dialog
box of the installation program is displayed. Click on the
“Finish” button to complete the installation.
• Starting SNMP Trap Notification Configurations
To start "SNMP Trap Notification Configruations", There have
two methods.
1. First, double-click on the "Areca RAID Controller".
2. Second, you may also use the "Taskbar Start/programs/
Areca Technology Corp/ArcSnmpConf" menus shown below.
• SNMP Community Configurations
About community, Community name acts as a password to
screen accesses to the SNMP agent of a particular network
device. Type in the community names of the SNMP agent.
Before access is granted to a request station, this station must
incorporate a valid community name into its request;
otherwise, the SNMP agent will deny access to the system.
Most network devices use “public” as default of their
community names. This value is case-sensitive.