Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache - Manual (Page 138)

ARCHTTP PROXY SERVER INSTALLATION
138
5.3 For FreeBSD
You must have administrative level permissions to install SAS RAID
software. This procedure assumes that the SAS RAID hardware and
FreeBSD are installed and operational in your system. The following
installation procedure explains how to install the SAS RAID software
for FreeBSD.
1. Insert the SAS RAID controller software CD in the CD-ROM
drive.
2. Login as root. Copy <CD-ROM>\PACKAGES\FreeBSD\http
ArcHTTP file to a local directory. The next steps are same as
Linux. Please see section 5.2 For Linux.
5.4 For Solaris 10
You must have administrative level permissions to install SAS RAID
software. This procedure assumes that the SAS RAID hardware and
Solaris are installed and operational in your system. The following
installation procedure explains how to install the SAS RAID software
for Solaris.
1. Insert the SAS RAID controller software CD in the CD-ROM
drive.
2. Login as root. Copy <CD-ROM>\PACKAGES\Solaris\http
ArcHTTP file to a local directory. The next steps are same as
Linux. Please see section 5.2 For Linux.
5.5 For Mac OS X
The firmware embedded McRAID storage manager can configure
and monitor the SAS RAID controller via ArcHTTP proxy server. The
ArcHTTP proxy server for Mac OS X has combined with the CLI and
driver on the install_mraid installer, please refer to Chapter 4.6
Driver Installation for Mac OS X.