Web browser-based configuration – Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache User Manual

Page 159

Advertising
background image

159

WEB BROWSER-BASED CONFIGURATION

Note:

The currently encryption feature only support key file in

-

terface to encrypt volumes.

electronic circuitry for the cryptographic engine embedded in

the ROC and operating at full channel speeds. The hardware

encryption does not impact the performance of ARC-1883

RAID controller and can implement on any kinds of HDD that

is transparent to the user, the OS, and applications.

Encrypting your volume can give your data an extra layer of

protection be yond setting up a controller password. Encryp-

tion will conceal your volume’s data and make accessing the

files almost im possible for anyone who does not know your

encryption key. Data saved in the volume will be hidden by

Algorithm developed by Areca Technology. With this scramble

process, no one can see and access into the hidden volume

data without access key. ARC-1883 adapters support 128- and

256-bit encryption keys using AES (a key size of 128, or 256

bits), or password (a variable key size). Each encryption key

size causes the algorithm to behave slightly differently, so the

increasing key sizes not only offer a larger number of bits with

which you can scramble the data, but also increase the com-

plexity of the cipher algorithm. ARC-1883 adapters provide

five new key options in the ‘Full Volume Encryption:”Disable’,

“256Bit key, Password”, “256Bit key, AES”, “128Bit key, Pass

-

word”, “128Bit key, AES”. You can generate the new key by

CLI utility or API code function.

This volume encryption function can only work with ARC-1883

series with any kinds of HDD. You can follow below steps to

enable the function.

1. Create volume set with “Full Volume Encryption” capability

in the web management.

2. Use CLI “vsf genkey” command or API code to generate key

file.

3. Use “Download Volume Key File” in the web management

or use CLI “vsf dlkey” command to download volume key

file into firmware and unlock the volume.

4. Follow step 3. to unlock volume if volume locked.

Advertising