Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache - Manual (Page 140)

ARCHTTP PROXY SERVER INSTALLATION
140
The following article describes a best practice methodology for
setting this up in the “SMTP Server Configurations”.
1. SMTP Server Configuration:
SMTP Server IP Address: Enter IP address of the SMTP server
to configure your mail program correctly.
Ex: 192.168.0.2.
2. Mail Address Configurations:
Sender Name: This is the sender name that the e-mail alerts
will appear to be coming from.
Ex: RaidController_1.
Mail address: This is the mail address that the e-mail alerts
will appear to be coming from, but don’t type IP to replace
domain name.
Ex: [email protected].
Account: Enter the valid account if your SMTP mail server
requires authentication.
Password: Enter the valid password if your SMTP mail server
requires authentication.
3. Event Notification Configurations:
This step involves setting up of notification rules. Notification
rules instruct ArcHTTP on the notifications that should be sent
when certain types of alerts are detected.
MailTo Name: Enter the alert receiver name that will be shown
in the outgoing mail.