Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache - Manual (Page 114)

DRIVER INSTALLATION
114
software CD or website to make driver diskette and install driver to
the system.
4.5 Driver Installation for Solaris
This chapter describes how to install the SAS RAID controller driver
to Solaris. Before installing the SAS RAID driver to Solaris, com-
plete following actions:
1. Install and configure the controller and hard disk drives accord-
ing to the instructions in Chapter 2, Hardware Installation.
2. Start the system and then press Tab or F6 to enter the McBIOS
RAID Manager configuration utility. Use the McBIOS RAID man-
ager to create the RAID set and volume set. For details, see
Chapter 3, McBIOS RAID Manager.
The supplied software CD that came with the SAS RAID controller
includes compiled and tested drivers for Solaris 10/11 x86/x86_64.
Please refer to the “readme.txt” file on the software CD or website:
http:/www.areca.com.tw to make driver diskette and install driver
to the system.