Read and discard parity data, Fail disk for any timeout, Web browser-based configuration – Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache User Manual
Page 191
Advertising
191
WEB BROWSER-BASED CONFIGURATION
(2). Read/Write Throttling is required and sorting is to be
disabled
(1). Buffer Threshold Setting: 5%
(2). Optimize For AV Recording Mode set to 3
(3). Reboot
(4). Adjust Read/Write Performance Margin to fine tune the
result (no reboot required)
• Read And Discard Parity Data
This function is used to determine if parity data is to be read
and discarded.
• Fail Disk For Any Timeout
Imaging system products expect to have constant speed for
writing raw data to the storage by constant speed without any
data loss whenever a drive becomes failure in RAID system.
This function is the option that RAID controller will kill off the
HDD for any time out. It can reduce the write cache size to buf-
fer the raw data.
Advertising