3 delete volume set, Bios configuration – Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache User Manual
Page 75
BIOS CONFIGURATION
75
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
More System Functions
Hdd Power Management
Ethernet Configuration
Alert By Mail Config
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Functions
Create Volume Set
Creat Raid30/50/60
Delete Volume Set
Modify Volume Set
Check Volume Set
Stop Volume Check
Display Volume Info.
Create Raid30/50/60
Create Raid 30/50/60 Free(Capacity)
[*]
Raid Set # 000 3000.0GB (3000.0GB)
[*]
Raid Set # 001 1000.0GB (8000.0GB)
[ ]
Raid Set # 003 150.0GB ( 240.0GB)
[ ]
Raid Set # 004 150.0GB ( 240.0GB)
[ ]
Raid Set # 005 150.0GB ( 240.0GB)
[ ]
Raid Set # 006 150.0GB ( 240.0GB)
[ ]
Raid Set # 007 150.0GB ( 240.0GB)
[*] Raid Set # 000 3000.0GB (3000.0GB)
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
More System Functions
Hdd Power Management
Ethernet Configuration
Alert By Mail Config
View System Events
Clear Event Buffer
Hardware Monitor
System information
Volume Set Function
Volume Set Functions
Create Volume Set
Create Raid30/50/60
Delete Volume Set
Modify Volume Set
Check Volume Set
Stop Volume Check
Display Volume Info.
Delete Volume Set
Select Volume To Delete
ARC-1883-VOL#009 (Raid 30/50/60 Vol)
ARC-1883-VOL#014 (Raid 30/50/60 Vol)
ARC-1883-VOL#002 (Raid Set # 001)
ARC-1883-VOL#003 (Raid Set # 002)
ARC-1883-VOL#004 (Raid 30/50/60 Vol)
Delete Volume Set
No
Yes
Note:
Raid Level 30 50 and 60 can support up to eight RAID sets
(four pairs).
3.7.3.3 Delete Volume Set
To delete volume set from a RAID set, move the cursor bar to
the “Volume Set Functions” menu and select the “Delete Volume
Set” item, then press the
Enter
key. The “Volume Set Functions”
menu will show all Raid Set # items. Move the cursor bar to a
RAID set number, then press the
Enter
key to show all volume
sets within that RAID set. Move the cursor to the volume set
number that is to be deleted and press the
Enter
key to delete
it.