Areca 24/4 Internal/External Port Pcie 3.0 12 Gb/s SAS/SATA Raid Controller 2Gb Cache - Manual (Page 229)

229
APPENDIX
• SNMP Trap Notification Configurations
The "Community Name" should be the same as firmware-
embedded SNMP Community. The "SNMP Trap Notification
Configurations" includes level 1: Serious, level 2: Error, level 3:
Warning and level 4: Information. The level 4 covers
notification events such as initialization of the controller and
initiation of the rebuilding process; Level 3 includes events
which require the issuance of warning messages; Level 2
covers notification events which once have happen; Level
1 is the highest level, and covers events the need immediate
attention (and action) from the administrator.
D-3-4-2 Linux
You must have administrative level permission to install Areca
RAID software. This procedure assumes that the Areca RAID
hardware and Linux are installed and operational in your sys -
tem. The old version agent has to modify the open source
project, integrate the changes from Areca manually, then take
the modified binaries and manually deploy them. Users need to
change source code from the linux distribution and then main -
tain it by themselves.
The new version agent provides the way to integrate with those
codes into snmpd/snmptrapd and create a sub-agent for user
easy to install it. The new version SNMP extension agent instal -
lation for Linux procedure, please refer to <CD-ROM>\pack -
ages\Linux\SNMP\readme.txt or download from ftp://ftp.areca.
com.tw/RaidCards/AP_Drivers/Linux/SNMP/V4.1/ .