Metrohm viva 1.0 (process analysis) - Manual (Page 130)

3.6 Run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
118 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Arrangement ID1...16
NOTE
The Sample amount and Sample amount unit fields are always
shown next to each other in one line.
Selection 1 column | 2 columns
Default value 1 column
1 column
If this option is selected, then the sample identifications ID1 - ID16
are shown in one column.
2 columns
If this option is selected, then the sample identifications ID1 - ID16
are shown in two columns.
3.6.3.8.3 Properties - Editing
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Properties Run win-
dow ▶ Properties - Single determination
Definition of the sample data that is to be automatically applied for the
next Single determination.
Copy automatically into next determination
Sample amount
on | off (Default value: on)
Sample amount unit
on | off (Default value: on)
Sample position
on | off (Default value: on)
Sample type
on | off (Default value: on)
Analytical volume
on | off (Default value: on)
Dilution volume
on | off (Default value: on)
ID1 - ID16
on | off (Default value: on)