Metrohm viva 1.0 (process analysis) - Manual (Page 382)

5.4 Method groups
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
370 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
5.4.2 Editing method groups
5.4.2.1 Method groups - Properties
Dialog window: Method ▶ File ▶ Method groups... ▶ Method groups ▶ [Proper-
ties] ▶ Properties - 'Name' method group
The Properties - 'Name' method group properties window for the
selected method group is opened with the [Properties] button or by
double-clicking on a line in the table.
The parameters for method groups are configured on the following tabs:
￭ General
General parameters.
￭ Access rights
Access rights for method groups and their methods.
5.4.2.2 Method groups - General
Tab: Method ▶ File ▶ Method groups... ▶ Method groups ▶ [Properties] ▶ Prop-
erties - 'Name' method group ▶ General
Name
Name of the method group. The name has to be entered when a new
method group is created.
Entry 50 characters
Number
Shows the number of methods in the method group.
Comment
Freely definable remarks about the method group.
Entry 1,000 characters
5.4.2.3 Method groups - Access rights
Tab: Method ▶ File ▶ Method groups... ▶ Method groups ▶ [Properties] ▶ Prop-
erties - 'Name' method group ▶ Access rights
Access rights for method groups and their methods can be assigned per
user group.
NOTE
The Administrators user group always has both access rights, i.e.
these rights cannot be disabled.