Metrohm viva 1.0 (process analysis) - Manual (Page 164)

3.8 Live display subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
152 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Context menu
Quit Canceling the active command of the track.
Live display # Setting the properties of the Live display # subwindow (see Chapter 3.8.5,
page 153).
Zoom
Curves can be zoomed as often as required by spanning a section of the
curve display from the top left to the bottom right with the left mouse
button pressed down. To display the entire curve again, span an area from
the bottom right to the top left with the left mouse key pressed down.
You can also zoom with the mouse. Rotate the scroll wheel downwards
to zoom in the curve at the location of the cursor in steps and rotate the
scroll wheel upwards to zoom out in steps.
Moving the curve
The curve can be moved to any location while holding the CTRL key and
the left mouse button pressed down, regardless of the zoom status. To
display the entire curve again, span an area from the bottom right to the
top left with the left mouse key pressed down.
3.8.3 Live display - Application note
Subwindow: Workplace ▶ Live display 1 / Live display 2
The application note of the loaded method defined in the START com-
mand is displayed on the Display application note tab. This tab is
opened by default in the Live display subwindow when the method is
opened.
3.8.4 Live display - Messages
Subwindow: Workplace ▶ Live display 1 / Live display 2
A scrollable message box containing all messages concerning events
occurring during the run of the current determination is located on the
Messages tab. Entries consist of messages that generate a database
entry in the determination but which are not significant enough to result
in the run being interrupted pending confirmation by the user.
Each message consists of Date, Time and Message text.
The message window is deleted when a run is started with [Start]. In this
way, all messages of the last single determination or determination series
can be viewed.
The label of the tab changes to red as soon as a new message has been
entered. The label of the Messages tab changes to black again after you
have viewed the messages and switched to another tab.