7 general - pwm controller – Metrohm viva 1.0 (process analysis) User Manual
Page 857
Advertising
■■■■■■■■■■■■■■■■■■■■■■
7 Devices
viva 1.0 (for Process analysis)
■■■■■■■■
845
Output parameters
Output slope
for Control task = Pump control
Input range
-214,783,647.000 - 214,783,647.000
Default value
1
for Control task = Free controller
Input range
-214,783,647.000 - 214,783,647.000
Default value
1
Output offset
for Control task = Pump control
Input range
0% mapping of the output - 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
for Control task = Free controller
Input range
0% mapping of the output - 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
7.10.8.1.7
General - PWM controller
Advertising