3 call va, 1 call va - overview, Call va – Metrohm viva 1.0 (process analysis) User Manual
Page 426
5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
414
￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Conditions
Sample type
on | off (Default value: off)
Selection of sample type for calling the track. If this check box is activated,
then the call is not carried out unless the sample type defined here
matches the sample type specified in the Run window for the sample
data.
Selection
Sample | Standard
Default value
Sample
Condition
on | off (Default value: off)
Expression for the condition(s) that can be created or edited with the for-
mula editor after pressing on
or by double-clicking in the text field
If this check box is activated, then the call is carried out only if the evalua-
tion of the condition yields the result 1 (= true).
Entry
1,000 characters
Default value
'empty'
5.5.2.4.3
CALL VA
5.5.2.4.3.1
CALL VA - Overview
Dialog window: Method
▶ CALL VA ▶ Properties... ▶ CALL VA - 'Command name'
Command for calling VA tracks. As an option, a condition can be for-
mulated that must be fulfilled so that the CALL VA command is execu-
ted.
Appearance
The command has the following appearance:
Parameters
The parameters for the CALL VA command are configured in the follow-
ing dialog window:
￭