Metrohm viva 1.0 (process analysis) User Manual
Page 646
5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
634
￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Calculation
Variable
Description
VEFF(SMPL)
Effective addition volume of the added sample solution
for the evaluation ratio.
VOL(SMPL)
Uncorrected addition volume of the sample for the eval-
uation ratio.
VTOT(VMS,S
MPL)
Total volume in the measuring vessel at the moment of
the measurement of the VMS by calling the measuring
command via the command CALL VMS at the moment
of calibration.
5.6.7.7.8
Unit of the effective addition volume of the sample solution for the
evaluation ratio
Variable name
RS.’Command name’.’Substance name’.VEFFSMPL.UNI
Description
Unit of the effective addition volume of the added sample solution for the
evaluation ratio.
Decimal places
−
Unit
g/L, L/L or mol/L (depending upon the unit of the standard solution)
Remark
Only for Calibration method = DT and Sample type = Sample.
5.6.7.7.9
Absolute standard deviation of the effective addition volume of the
sample solution for the evaluation ratio
Variable name
RS.’Command name’.’Substance name’.VEFFSMPL.ASD
Description
Absolute standard deviation of the effective addition volume of the added
sample solution for the evaluation ratio.
Decimal places
0…2…6
Unit
#L
Remark
Only for Calibration method = DT and Sample type = Sample.