Metrohm viva 1.0 (process analysis) - Manual (Page 746)

6.10 Global variables subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
734 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
6.10 Global variables subwindow
6.10.1 Configuration - Global variables
Subwindow: Configuration ▶ Global Variables
Global variables subwindow
The Global Variables subwindow contains the table with the configured
global variables. It can be shown in the Configuration program part as a
part of the configuration view or (if not present on the user interface) in a
separate window with
▶ Quick access. The subwindow can be enlarged
and reduced as required; it can also be maximized.
Using global variables
Global variables are variables that apply to all methods and that are stored
for all clients; they can be used in formulas under the designation
'GV.Name'. They are either entered manually in the configuration or
assigned in the method run under Evaluation - Results - Global varia-
bles.
6.10.2 Table of global variables
6.10.2.1 Table of global variables
Subwindow: Configuration ▶ Global Variables
Contents
The table of global variables shows the following information about the
global variables by default:
Name
Name of global variable.
Type
Type of global variables (Number, Text or Date/Time).
Value
Value the global variables.
Unit
Unit of the global variables.
Assignment date
Date of the last value assignment for the global variable.
Assignment method
Name of the method used for value assignment.