Metrohm viva 1.0 (process analysis) - Manual (Page 474)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
462 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection Avantes Spectrometer
Default value Avantes Spectrometer
5.5.2.6.2.3 CAL Spec - Measuring parameters
Tab: Method ▶ CAL Spec ▶ Properties... ▶ CAL Spec - 'Command name' ▶ Mea-
suring parameters
Command name
Name of the command.
Entry 25 characters
The parameters for the measuring procedure can be defined on this tab.
Integration time
Integration time for the acquisition of the spectrum.
Input range 0.01 - 600,000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are acquired and averaged.
Input range 1 - 10,000
Default value 10