Metrohm viva 1.0 (process analysis) - Manual (Page 681)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 669
Text templates
on | off (Default value: on)
Exporting saved text templates (see Chapter 3.5, page 106).
Sample assignment table
on | off (Default value: on)
Exporting the saved sample assignment table (see Chapter 3.4, page 104).
Security settings
on | off (Default value: on)
Exporting security settings (see Chapter 6.2.2.1, page 656).
User administration
on | off (Default value: on)
Exporting user administration (see Chapter 6.2.1.1, page 649).
[OK]
The Save dialog window for saving data, in which the name and directory
for the export file must be entered, opens. The selected configuration
data is then saved in a file with the extension .mcfg.
6.3.1.2 Importing configuration data
Dialog window: Configuration ▶ File ▶ Import... ▶ Import configuration data
The Import configuration data dialog window, in which the following
parts of the configuration database can be selected for import, is opened
with File
▶ Import... after selection of the *.mcfg file to be imported:
NOTE
Data that is not present in the export file cannot be selected.
Devices
on | off (Default value: on)
Importing configuration data for devices (see Chapter 6.4, page 682).
Dosing units
Importing configuration data for dosing units (see Chapter 6.6, page
695).