Metrohm viva 1.0 (process analysis) - Manual (Page 429)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 417
Call text
Freely editable text for the designation of the call that is displayed in the
command depiction.
Entry 50 characters
Default value 'empty'
Track name
Selection of the VA track to be called up. All of the VA tracks available in
the method are displayed.
Selection 'Track name' | 'empty'
Default value 'empty'
Condition
on | off (Default value: off)
Expression for the condition(s) that can be created or edited with the for-
mula editor after pressing on or by double-clicking in the text field
(see Chapter 2.3, page 14).
If this check box is activated, then the call is carried out only if the evalua-
tion of the condition yields the result 1 (= true).
Entry 1,000 characters
Default value 'empty'
5.5.2.4.5 CALL INTERCEPT
5.5.2.4.5.1 CALL INTERCEPT - Overview
Dialog window: Method ▶ CALL INTERCEPT ▶ Properties... ▶ CALL INTERCEPT -
'Command name'
Command for calling a VA track. The data acquired in the called VA
track is used for the calculation of the intercept value in the MLAT cali-
bration method. As an option, a condition can be formulated that must
be fulfilled so that the CALL INTERCEPT command is executed.
Appearance
The command has the following appearance: